Ø Read and erase fault codes for BMW / MINI on Engine, ABS, SRS, gearbox and 170 more different ECU systems; turn off the malfunction indicator light on dashboard
Ø Read live data stream, view freeze frame data and vehicle identification data (VIN, CIN, CVN)
Ø Special functions such as Oil light/ service reset, DPF regeneration, brake pad reset, battery check, battery life reset, steering angle recalibration, etc.
Ø Oil Light Service Reset: Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset
Ø DPF ( diesel particulate filter) : regenerate DPF, Reset the EOLYS additive light, Identify DPF fault codes, Reset the diesel particulate filter Counter
Ø EPB: Open and closed the brake pads, Initial after replacing EMF control module, Initial after replacing Bowden-cable assemblies , Initial after replacing Bowden-cable assemblies , Initial after replacing Bowden-cable assemblies ,read and clear EPB/SBC clipper functionality, reset front and rear brake, etc.
Ø ABS/AIRBAG: Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.
Ø Battery check and Battery Management Service Reset, register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode
Ø Steering Angle Sensor Adjustment after changing a new battery, this is a MUST DO step after you replace a battery for BMW/MINI, After replacing the active steering control unit (AL), After replacing the steering column switch (SZL): only E60/E61/E63/E64, After replacing the steering column switch (SZL): only E90/E91, Replacing or programming the Dynamic Stability Control (DSC), After replacing the steering gear
Ø Completely 10 modes of OBD/EOBD diagnostic compliant to American, European and Asian cars, mini vans and SUVs 1996 and newer
Ø Test the I/M readiness, O2 sensor, on-board monitor, component work status
Ø Huge built-in fault code lookup library for guiding you to fix the problems easily
Ø Multilanguage interface: English, French, Spanish, German, Russian, Italian, etc.
Ø Software upgradable via internet
UPC: 739810871929
Supported BMW / MINI models:
1 Series---Chassis: E81/E82/E87/E88 and F20/F21;
2 Series---Chassis: F22/F23/F45/F46
3 Series---Chassis: E46/E90/E91/E92/E93,F30/F31/F34/F35/F80
4 Series---Chassis: F32/F33/F36/F82/F83
5 Series---Chassis: E39/E60/E61/F07/F10/F11/F18
6 Series---Chassis: E63/E64/F06/F12/F13
7 Series---Chassis: E38/E65/E66/E67/E68/F01/F02/F03/F04
X Series---Chassis: X1:E84/F48; X3:E83/F25; X4:F26; X5: E53/E70/F15/F85; X6: E71/E72/F16/F86
Z Series---Chassis: Z3/Z4/E85/E86/Z4/E8/Z8/E52
I Series---Chassis: I3/I01/I8/I12
MINI: R series and F series of Chassis systems





