Why  NEXAS NexLink?

• Bluetooth 5.0: Stable connection and fast data transmitting; Low power consumption, won’t drain your car’s battery.

• Enhance Diagnostic: Read (and clear) manufacturer-specific codes and access live parameters on a wide range of Ford, GM, Mazda, Nissan, Toyota, VW /AUDI /SKODA /SEAT, BMW / MINI vehicles; It can also diagnose motorcycles.

• Dozens of compatible Apps and more added all the time.

• Unmatched performance: NexLink 200% faster than the closest competitor — display multiple live parameters and enjoy smooth gauges & graphs.

• Hacker-proof: unique security mechanism eliminates the risk of unauthorized access.

Apps Compatible with NexLink Adapter: (Please be aware that the Fee listed is for reference only and may change sometimes. Some apps offer inside-app purchase. Check out with APP provider)

• Torque Lite/Pro (Android only): Most popular OBDII performance and diagnostic tool for Android, support importing PIDs (get fault codes, sensor data and more).

• CAR SCANNER ELM OBDII (Android, iOS, Windows): See what your car is doing in real-time, get OBD fault codes, car performance, sensor data etc. (Most features for free).

• DashCommand (Android, iOS): USD9.99, turn your phone / tablet into an advanced display for your engine data and check why the check engine light keeps going on.

• Carista OBDII (Android, iOS): Diagnose, customize, and service your car, shows you a list of the fault codes stored in your vehicle, as well as their meanings. You can also reset the "Check Engine" light. (dealer-level technology for Audi, VW, Toyota, Lexus, BMW, etc.)

• OBD Fusion (Android, iOS): USD9.99; Read DTCs & clear check engine light, create customized dashboards, estimate fuel economy, and much more, plus enhanced diagnostics for Ford, Lincoln, Mercury, Mazda, Toyota, Lexus, Scion, Nissan vehicles.

• DashCommand (Android, iOS): USD9.99, turn your phone / tablet into an advanced display for your engine data and check why the check engine light keeps going on.

• BimmerCode (Android, iOS): Code the control units in your F/G series BMW or Mini made simple. / BimmerLink (Android, iOS): Read trouble codes from all ECUs and display sensor values in real-time, check the current state of the DPF in your car or register a new battery after replacement for BMW or Mini.

• Leafspy (Android, iOS): For Nissan Leaf owners to monitor the battery and other vehicle information normally visible only to the dealer. / Dr. Prius (Android, iOS): Help professional Toyota / Lexus hybrid repair shop or owners to examine the health of the High Voltage battery.

• TrackAddict (Android, iOS): OBDII Live Monitor, Code Scanning / Reset, and Data Logging.

• Harry's LapTimer (Android, iOS): The advanced tool for car enthusiast. It records all types of sensor data provided by your smart phone (or external sensors), combines them, and makes them available to optimize your drive.

• InCarDoc (Android, iOS): Check Engine codes reading, diagnostic, monitoring and logbook tool: reads real-time and stored diagnostics parameters from ECU of OBDII compliant cars.

• FORScan (Android, iOS): The application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles; Read

• and reset diagnostic trouble codes (DTC) for all modules; Read sensors and other data (PIDs) from all modules;

• JScan (Android, iOS): It is powerful Jeep diagnostic application. / Piston (Android only): The application designed with the simplicity in mind.

• OBD Auto Doctor (Android, iOS, windows, mac): Read readiness monitor status, On-Board Diagnostic Monitors, Diagnostic Trouble Codes (DTCs), Freeze Frame, and clear the codes and MIL; View OBDII parameter and sensor data in real-time to detect abnormalities; Monitor OBDII sensor data in numerical or graphical presentation; Support for multiple electronic control units such as engine, transmission, etc.

• Motoscan ( Android): With NexLink Adapter most current BMW motorcycles (C, F, G, K,R,S and Husqvarna series) can be completely diagnosed (Version 1.66 or higher). An inexpensive solution for all hobbyists and professional screwdrivers that we have developed based on many inquiries from BMW bikers. Read ID, read and clear trouble codes, read live data, actuator test, engine service interval, coding and adaptation and other service function. It has different versions, some free, some not.

• TuneECU (Android): Motorbikes diagnostic for Triumph, Aprilia, Benelli, Ducati & Moto Guzzi, Morini, Gilera, Husqvarna, KTM, BMW & CCM. Etc. Read ID, read and clear trouble codes, read live data, actuator test, engine service interval, coding and adaptation and other service function.

NexLink Bluetooth 5.0 vs. OBDLink MX+ vs. OBDLink LX: What should I buy? This article from OBD FOCUS could help you to make a decision:

https://obdfocus.com/nexlink-bluetooth-vs-obdlink-mx-vs-obdlink-lx/

Device Setup Instructions(The User Manual has all details for the APP):

• Step 1: Download and install the APP on your phone / tablet.

• Step 2: Locate the OBDII diagnostic port and Plug the device into the 16-Pin Data Link Connector (DLC) of your vehicle. Make sure the connection is good. “RED LED” always on for power indication. “BLUE LED” flashes when plug in for paring or in communication with ECU. When no communication, the “BLUE LED” might be off.

• Step 3: Turn ignition key to the ON position (or start up the vehicle running at idle speed).

• Step 4: Enable Bluetooth on your phone / tablet. (On iOS devices: You will see "NEXAS" on the list of Bluetooth devices, but DO NOT pair with it from here. Please go to the next step directly. On Android or Windows devices: Pair with "NEXAS" in Bluetooth settings of the devices and connect it by inputting a PIN of 1234)

• Step 5: Run the APP, make the connection settings and connect. (Please refer to the detailed instructions and Connection / settings for each App.)

Note: Turn the ignition OFF before plugging in and remove this OBDII device from your vehicle after use.

App Settings and Connect: (Use Bluetooth LE for iOS apps. For Android Apps, use Bluetooth instead of Bluetooth LE) The name format of the device is: NEXASYYMMXXXX, ie. NEXAS20060001. 

For Example:

OBD Fusion(Android, iOS): Settings > Preferences > Communications> Communication Type > Select Bluetooth LE(iOS) / Bluetooth(Android).

DashCommand (Android, iOS): Settings > OBDII adapter > Bluetooth Device.

Motoscan ( Android):

Make sure your phone / tablet’s Bluetooth is turned on.

There’s prior setup, pairing, or connecting necessary for android Bluetooth connection settings.

Go to application's Configure (click on the “≡ three line icon” in the upper left corner).

Click on “Setting” > Select “Communication” > The Communication Type is set to Bluetooth > Bluetooth device selection Paired Device "NEXAS".

·       【Smart Design】: Simply turn your iPhone, Android device or Windows PC into a professional-grade diagnostic scan tool. Bluetooth 5.0 stable and fast connection, low power consumption.

·       【Powerful Function】: Read and clear fault code, tell the codes definition, read the live data, turn off engine check light in a blink of your eye, I/M Readiness, Battery test, Freeze frame, O2 sensor and EVAP system test, On-Board Monitoring, Performance Test, Diagnostic reports, Built-in OBD II Fault code look-up library, no google and no guess.

·       【Extensive Compatibility】: Support all OBD2 / EOBD compliant cars, SUV, mini van and other 12V light duty vehicles. Cover all five OBD-II protocols: CAN, KWP2000, ISO9141-2, J1850 VPW and J1850 PWM.

·       【Enhance Diagnostic Apps】: DashCommand for car fans; Carista for dealer-level technology for Audi, VW, Toyota, Lexus, BMW, etc; OBDFUSION for Ford, Lincoln, Mercury, Mazda, Toyota, Lexus, Scion, Nissan vehicles. BIMMER CODE for coding and DPF regen BMW/MINI.

·       【Easy To Use & Instant Service】: Use it as easy as pie, simply plug and pair the Bluetooth, you are ready to explore your car. 18-month hassle free warranty and 24/7 technician at your finger by email us at service@nexastech.com.